StarCraft Inkjet Printable 10-Pack

Protect your StarCraft inkjet printable adhesive vinyl designs using StarCraft Glossy UV Laminate.  UV Laminate protects your design from harmful ultra-violet light sources.  Our UV Laminate is specially made to repel adhesives, dirt, grime, and other contaminates.

Application Instructions

1.  Print images onto StarCraft inkjet printable adhesive vinyl using a standard consumer grade inkjet printer.  (no laser printers)
2.  Apply StarCraft UV Laminate over the design carefully, avoiding air bubbles.  A squeegee is recommended for application.  It is not recommended to apply an entire sheet if not necessary, apply only enough to cover your printed design.
3.  Cut around your design using print and cut technology with a die-cutting machine and software.  Additional pressure or multiple cuts is normally required since the laminate adds another layer. 
4.  Peel and stick your design to a clean, dry, wax-free surface.  

Additional Notes

Our UV laminate is specially formulated to repel dirt, water, and adhesives.  This means the use of transfer tape may be difficult or even impossible.  We recommend simply peeling and sticking your design onto the desination surface.  If your design has small parts that are separated, this may complicate application.

Care Instructions

1.  Do not use in dishwasher or microwave.
2.  Exposure to harsh environments may reduce life expectancy.

Our inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black.    A heat press is recommended for applying this product because of the temperature and pressure requirements.  Peel from the backing paper or use heat transfer mask before pressing.

StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions.

Click here for help deciding which transfer material is right for your application

Application and Care Instructions

• Press at 350 Degrees for 30 Seconds under MEDIUM pressure
• Peel when entirely COOL to the touch
• To wash, turn garment inside out, wash in cold water.  Do not bleach.
• Tumble dry low heat (hang dry recommended).
• If ironing, do NOT iron directly on the applied image.
• Heat Transfer Mask is recommended.  Larger, one-piece transfers can be applied without transfer mask.

Click here to see a video 

StarCraft Transfers for Light Materials 8.5" x 11" Sheets make it easy to create your own printed image for application to light colored materials ranging from white to about lighter pastel colors. The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment. A heat press is highly recommended for applying this product due to temperature and pressure requirements. When applying to colored garments you may see the polymer where no ink is printed around the image--this will fade and soften after the garment is washed once or twice.

Application and Care Instructions

• Press at 375 Degrees for 30 Seconds under HIGH pressure
• Peel HOT, all in one motion, do not stop in the middle of peeling or it may show a line in your finished design.
• To wash, turn garment inside out, wash in cold water. Do not bleach. Tumble dry low heat (hang dry recommended).
• If ironing, do NOT iron directly on the applied image.